Product Overview

 

Industrial control cables transmit mechanical force and signal feedback between an operating interface and a controlled mechanism. Designed for high-cycle fatigue resistance and low-friction motion transfer, these assemblies minimize mechanical backlash and maintain actuation integrity under continuous vibration, dust, and moisture exposure.


Supplied directly from our vertically integrated manufacturing facility—equipped with in-house wire stranding, thermoplastic extrusion, and CNC Swiss-lathe machining—we engineer control cables tailored to specific OEM integration constraints.

 

 
  • Steel Wire Armored Copper Control Cable
    In vertical shafts, mines, or steep slopes, cables must support their own weight while resisting environmental pressure. Our Steel Wire Armored Copper Control Cable (KVV32) is engineered exactly...
  • Steel Tape Armored Industrial Control Cable
    When control signals must travel underground or through areas with heavy machinery, the Steel Tape Armored Industrial Control Cable (KVV22) is the industry's go-to solution.
  • Copper Tape Screened Signal Control Cable
    For high-frequency interference scenarios where braided shields might have "leakage," our Copper Tape Screened Signal Control Cable (KVVP2) offers 100% physical coverage. This cable is designed...
  • Copper Braided Shielded Signal Control Cable
    The Copper Braided Shielded Signal Control Cable (KVVP) is our specialized solution for industrial environments plagued by electromagnetic interference. In modern factories, high-power motors and...
  • Multi-Core Copper Conductor Control Cable
    Our Multi-Core Copper Conductor Control Cable (KVV) serves as the essential "nervous system" for modern industrial automation. Engineered for control circuits up to 450/750V, this cable is...
  • Single Core Power Cable
    KVV32
    Conductor Size Range:1.5mm² to 630mm²
    Voltage Rating:600V to 33kV
    Insulation Thickness:0.7mm to 4.5mm
  • Buried Power Cable
    KVV22
    Jacket Thickness:2.5mm minimum
    Crush Resistance:2500 N per meter
    Water Blocking Tape:Super absorbent polymer
  • Aerial Power Cable
    KVVP2
    Messenger Material:Galvanized steel (5mm diameter)
    Span Length:Up to 100 meters
    Insulation Type:XLPE or HDPE
  • Submersible Power Cable
    KVVP
    Insulation Material:Cross linked polyethylene (XLPE)
    Water Depth Rating:Up to 200 meters
    Jacket Material:Chlorinated polyethylene (CPE)
  • Pvc Insulated Aluminum Cable
    KVV
    Conductor Type:1350 aluminum (EC grade)
    Insulation Material:PVC type 6 (90°C)
    Voltage Rating:600V / 1000V
  • Copper Control Cable
    KVV32
    Conductor: Copper
    Insulation: PVC
    Inner Liner: Wear resistant material
    Armour: Galvanized fine steel wire
  • Armoured Control Cable
    KVV22
    Conductor: Copper
    Insulation: PVC
    Inner Liner: PVC or PE tape
    Armour: Double layer galvanized steel tape
First 12 Last
 
Product Types & Applications
 

Selecting the correct cable architecture depends on the operational load profile (push, pull, or dual-direction push-pull).

Cable Type

Core Configuration

Primary Industrial Applications

Push-Pull Control Cables

Solid or stranded core inside a rigid conduit liner

Heavy machinery throttles, PTO engagement, transmission shifting, marine clutch controls.

Mechanical Bowden Cables

Flexible stranded wire with inner PTFE/PE liner

Braking systems, throttle linkages, medical mobility equipment, agricultural implements.

Industrial Latch & Release Cables

High-tensile stainless steel multi-strand

Enclosure security locks, emergency shut-offs, automotive hood and seat releases.

 

productcate-400-400

 

Technical Specifications

To request custom engineering tolerances, finite element analysis (FEA) test reports, or submit 2D/3D CAD models (STEP/IGES) for rapid DFM review, use the quote form below.


Inner Wire Diameter: 1.0 mm to 12.0 mm


Conduit Outer Diameter: 4.0 mm to 25.0 mm


Minimum Bend Radius: 50 mm to 300 mm (dependent on load and construction)


Maximum Tensile Load: Up to 45 kN (static breaking load)


Operating Temperature: -40°C to +120°C (standard); up to +200°C (high-temp PTFE options)


Efficiency / Friction Loss: ≤ 8% at rated load (dry or lubricated per specification)

 

Materials & Construction

Cable durability relies on material compatibility between the inner conductor, conduit liner, armor reinforcement, and outer jacket.


Inner Conductor: AISI 304 or 316 stainless steel for high corrosion resistance; hot-dip galvanized carbon steel for high tensile strength requirements.


Inner Liner (Conduit Core): Extruded High-Density Polyethylene (HDPE) or PTFE (Teflon) to minimize sliding friction and eliminate the need for periodic field lubrication.

Armor Layer

Flat wire or multi-strand steel reinforcement wound helically to resist crushing under heavy compressive loads (essential for push-pull applications).

Outer Jacket

Virgin thermoplastic polyurethane (TPU), UV-stabilized PVC, or silicone compounds formulated to resist hydraulic fluids, diesel, salt spray, and mechanical abrasion.

End Fittings

Zinc-plated carbon steel, passivated stainless steel, or forged brass clevises, threaded studs, eyes, and ball joints machined on CNC Swiss lathes.

 

Standards & Quality Control
 

Our manufacturing facilities operate under stringent quality assurance protocols to maintain batch-to-batch consistency for Tier-1 industrial and automotive supply chains.

Certifications

ISO 9001:2015 and IATF 16949 compliant quality management systems.

Testing Protocols

Tensile Strength Testing: Destructive and non-destructive load cell testing to verify breaking strength and yield points.
Cyclic Fatigue Testing: Automated test rigs simulate operational life cycles (up to 500,000+ actuation cycles) to measure stroke degradation and elongation.
Corrosion Resistance: Salt spray testing (ASTM B117) exceeding 500 hours for exposed metal end-fittings.
Dimensional Inspection: 100% optical and gauge verification of critical lengths, thread pitches, and fitting orientations.

 

Customization & OEM Capabilities

Standard off-the-shelf cables rarely fit complex machinery layouts. We partner directly with engineering teams to develop custom motion-control assemblies based on your CAD models or sample specifications.

 
 

Custom Parameters

Overall length, free play tolerances, stroke distance, and load thresholds.

 
 
 

End Fitting Customization

Proprietary or standard threaded terminals, custom-molded plastic end caps, mounting brackets, and dampening springs.

 
 
 

Prototyping & Tooling

Rapid prototyping supported by in-house CNC machining and quick-turn tooling for sample validation within 7 to 10 business days.

 

 

Bulk Supply & Delivery

Packaging Options

Coil packaging, coiled and zip-tied in anti-corrosion VCI bags, or custom length-sorted cartons labeled with barcodes (OEM part numbers, QR codes) for automated assembly lines.

 

Production Lead Time

3 to 4 weeks for standard volume orders; scheduled release programs (Kanban / Blanket Orders) available for recurring annual forecasts.

 

Shipping & Logistics

FOB / CIF terms via air freight or sea container from our export-ready manufacturing hub, backed by export-grade crating to prevent transit damage.

 

 

FAQ & Request a Quote

 

 

Q: What is the minimum order quantity (MOQ) for custom-engineered cables?

A: For standard configurations, MOQ starts at 500 pieces. For custom tooling or unique end-fittings, we evaluate requirements on a case-by-case basis to support pilot runs.

Q: How do you prevent inner cable corrosion in marine environments?

A: We use passivated AISI 316 stainless steel inner strands paired with sealed boot covers and UV-resistant TPU jackets to block saltwater ingress.

Q: Can you match an existing proprietary cable sample?

A: Yes. Send us a physical sample or technical drawing, and our engineering team will perform reverse-engineering analysis, material testing, and provide a dimensional compliance report.

 

modular-1
Request a Custom Quote

To receive a technical review and quotation within 24 hours, please provide:
Application type and operating environment.
Required tensile load and stroke length.
Quantity per shipment / annual volume forecast.
Technical drawings, sketches, CAD models (STEP/IGES), or reference part numbers.

As one of the most experienced control cables manufacturers in China, featured by quality products and low price. Please rest assured to wholesale customized control cables made in China here from our factory. For quotation, contact us now.

Copper Control Cable, Armoured Control Cable, Universal Control Cable
Send Inquiry